ZM-7205A 310V Brushless DC Motor Driver 220V AC Control with High Voltage

Description

Description
ZM-7205A 310V Brushless DC Motor Driver 220V AC Control with High Voltage High Power
Description:
ZM-7205A DC brushless motor driver is the latest launch of our company. It targets high-tech products in the field of medium power motor drives. ZM-7205A uses large-scale integrated circuits to replace the original hardware design, with higher anti-interference and fast response performance. It is suitable for driving any low-voltage three-phase DC brushless motor with Hall or no Hall with input current below 5A and power supply voltage within AC70V~230V (nominal panel AC80V~220V), featuring high-current operation and low temperature. Therefore, it can be used in electrical automation control fields such as knitting equipment, medical equipment, food packaging machinery, and power tools.
Main Features:
- It can be connected to an external speed display board; it can also be connected to a computer to set the drive parameters
- Double closed-loop design of current speed, large torque at low speed, and stable operation
- High torque and high speed output. The maximum speed is up to 20000rpm/min (depending on users' motor)
- Speed regulation mode: external PWM speed regulation or external potentiometer speed regulation
- With EN (enable), DIR (direction), and X1 (brake) signal control terminals
- Can output speed pulse FG (optical isolation, gate output)
- Can output alarm signal ALM for user detection (optical isolation, gate output)
- With over-current, over-voltage, under-voltage, fan control, Hall sensor phase error, motor stall and other protection functions
This product can realize the following functions: (standard factory default setting is square wave with Hall open loop mode)
1. Square wave with Hall speed open-loop operation
2. Square wave has Hall speed closed-loop operation
3. Square wave open-loop operation without Hall speed
4. Square wave closed-loop operation without Hall speed
5. Constant torque open-loop mode operation (long-time overload operation is strictly prohibited)
6. Constant torque closed-loop mode operation (long-time overload operation is strictly prohibited)
Attention:
- The above functions can be set by users according to the PC software or handheld intelligent setting unit provided by our company.
- When there is no Hall operation, there is no direction control function.
Electrical Performance Index (at ambient temperature Tj=25℃):
- Power supply: AC70V~230V AC power supply (the capacity is selected according to the motor power)
- Input maximum current: no more than 5A (depending on the motor and rated load)
- Input maximum power: maximum 1100W (it is strictly prohibited to adapt to excessively high-power motors)
- Insulation resistance: >500MΩ at room temperature
- Dielectric strength: 0.5KV at normal temperature and pressure, 1 minute
- Cooling method: natural air cooling and forced air cooling
- Use environment: Occasion: try to avoid dust, oil mist and corrosive gas. Temperature: 0℃ to +50℃. Humidity: <80%RH, no condensation, no frost. Vibration: <0.5G (4.9m/s²) 10Hz-60Hz (discontinuous operation)
- Storage temperature: -20℃ to +65℃
- Dimensions: 150 x 97.5 x 53mm/5.9 x 3.8 x 2.1"
- Weight: about 0.55Kg/1.2lb
Attention:
Due to the drastic changes in the storage and transportation ambient temperature, condensation or frost is likely to occur. At this time, the driver should be placed for more than 12 hours, and the driver can be powered on and run after the temperature of the driver is consistent with the ambient temperature.
Package Included:
- 1 x DC Motor Driver
- 1 x Handheld Intelligent Setting Unit
- 1 x Cable
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Aug 5, 2022 at 20:44:10 PDT, seller added the following information: