ZK-PP2K PWM Motor Speed Controller Regulator Frequency Cycle Adjustable Module U

Description

Categories
ZK-PP2K PWM Motor Speed Controller Regulator Frequency Cycle Adjustable Module U
Description
Features
1.Can directly drive LED, motor, solenoid valve and other loads;
2.Two modes can be selected:PWM mode-frequency (continuous), duty cycle. Note that this mode can not set the number of switching times, has been cycling on and off; PULSE pulse mode - positive pulse width time, negative pulse width time, power-on delay start time, switching times adjustable.
3. With start-stop button to control start and stop;
4. Wide voltage input 3.3-30V, 5.08mm terminal wiring;
5. The product is made of high quality material, quality is guaranteed
Specification
Input voltage:6.0-36V
Output type:MOS switch
Load carrying capacity: <8A
Connect large load: can
Wide Viewing Angle Screen:Yes
Operating Voltage:3.3-30V
Frequency range:1Hz~150KHz, accuracy about 2%. Motor speed control generally choose 20KHZ
Number of pulses:1-9999, or infinite (display '----' represents infinite)
Delay output time: 0.000s-9999s, minimum 1ms can be set.
Duty cycle range: 0-100%, 1% step
Positive and negative pulse width length: 0.000s-9999s, the minimum can be set 1ms
Output load capacity: less than 8A (MOS switching tube)
Output amplitude: amplitude equal to the supply voltage (OUT+ and V+ module internal direct connection)
Practical scenarios
1. LED brightness adjustment, frequency, duty cycle can be adjusted
2. Motor speed adjustment, frequency, duty cycle can be adjusted
3. Drive the solenoid valve suction and release, automatic cycle, delay output, cycle times (or infinite cycle) can be set
4. Control the conduction and shutdown of the equipment, do switching fatigue test, voltage drop and other tests to verify the reliability of the customer's equipment.
5. Delay start load, delay time can be set, after the delay has been on or intermittent work
List
1 x PWM generator
ZK-PP2K PWM Motor Speed Controller Regulator Frequency Cycle Adjustable Module U
Description
Features
1.Can directly drive LED, motor, solenoid valve and other loads;
2.Two modes can be selected:PWM mode-frequency (continuous), duty cycle. Note that this mode can not set the number of switching times, has been cycling on and off; PULSE pulse mode - positive pulse width time, negative pulse width time, power-on delay start time, switching times adjustable.
3. With start-stop button to control start and stop;
4. Wide voltage input 3.3-30V, 5.08mm terminal wiring;
5. The product is made of high quality material, quality is guaranteed
Specification
Input voltage:6.0-36V
Output type:MOS switch
Load carrying capacity: <8A
Connect large load: can
Wide Viewing Angle Screen:Yes
Operating Voltage:3.3-30V
Frequency range:1Hz~150KHz, accuracy about 2%. Motor speed control generally choose 20KHZ
Number of pulses:1-9999, or infinite (display '----' represents infinite)
Delay output time: 0.000s-9999s, minimum 1ms can be set.
Duty cycle range: 0-100%, 1% step
Positive and negative pulse width length: 0.000s-9999s, the minimum can be set 1ms
Output load capacity: less than 8A (MOS switching tube)
Output amplitude: amplitude equal to the supply voltage (OUT+ and V+ module internal direct connection)
Practical scenarios
1. LED brightness adjustment, frequency, duty cycle can be adjusted
2. Motor speed adjustment, frequency, duty cycle can be adjusted
3. Drive the solenoid valve suction and release, automatic cycle, delay output, cycle times (or infinite cycle) can be set
4. Control the conduction and shutdown of the equipment, do switching fatigue test, voltage drop and other tests to verify the reliability of the customer's equipment.
5. Delay start load, delay time can be set, after the delay has been on or intermittent work
List
1 x PWM generator