STARTER SOLENOID PIGTAIL REPAIR HARNESS PLUG FOR, 1984-93 TOYOTA 4RUNNER 4,6 CYL

Description

Up for sale is a brand new, unused, starter solenoid pigtail connector harness plug for
1984-1993 TOYOTA 4RUNNER, 4 CYL (2.4L) AND 6 CYL (3.0L).
This is the single lead (male) pigtail harness that plugs into the starter solenoid. Long term exposure to the elements tends to cause the plastic on the original pigtail to become brittle and crack/break. This replacement pigtail can resolve this issue.
Typically, the replacement harness is spliced into the vehicle's existing harness by crimping it in place with a butt connector and crimping tool (not included). Please be sure to use sufficient pressure with the crimping tool to ensure tight crimps on the ends of both wires being crimped.
To verify that the new pigtail harness has been properly attached, use a
FAIR
amount of force to pull on both sides of the butt connector simultaneously.
(
USE ABOUT THE SAME AMOUNT OF FORCE AS YOU USE WHEN TYING YOUR SHOELACES
)
.
The newly crimped ends should
not
give any slack
at all
. If the wire(s) begin to pull out away from the butt connector, cut the butt connector off and repeat the process with a new butt connector and make sure to impose sufficient force on the new butt connector with the crimping tool.
The pigtail harness carries a
10 YEAR WARRANTY
against defects in workmanship and materials. No warranty on labor or other associated costs.
Please note:
It is the buyer's responsibility to verify that this replacement part fits the vehicle's application. The picture shown depicts the actual style of pigtail harness that you will receive.
Please e-mail us
BEFORE
purchasing with any questions or concerns and we will respond within 24 hours. We have been in business for over 30 years and are known for our outstanding customer service. In the unlikely event that an issue should arise during the course of this transaction, rest assured that we will do our best to reach a satisfactory resolution to the problem. Thank you!