Multifunctional low voltage servo drive 48V 800W 1000W controller

Description

Multifunctional low voltage servo drive 48V 800W 1000W controller
Products Description
1.1 Scope ofApplication
 Suitable for driving permanent magnet synchronous servo motor, low voltage
AC servo motor.
 Applicable motor: 24V 600W, 48V 1200W
 Continuous current 30A, maximum peak current 60A over current protection
time: 1s).
 DC working power +24~60V±10%.
 Speed mode, torque mode, position mode;
1.2 Working Condition
1.2.1 Power supply
 Rated working power: 24-60VDC.
 Limit power supply range: 18--65VDC
 It can provide instantaneous current overload capability of 2 times continuous
current.
1.2.2 Feedback components
 Incremental encoder
 Absolute encoder
1.2.3 Operating environment
 Operating temperature: -25~55 °C (based on ambient temperature).
Storage temperature: -35~65°C (based on ambient temperature).
 Humidity: 5%--90%RH, condensation (25°C)
 Protection level: IP22.
 Insulation performance: input to the chassis DC600V, leakage current 0.07mA.
The insulation resistance is 20 MΩ and more.
 Three-proofing requirements: meet the requirements of three proofing (dust,
moisture, salt spray).
 Vibration requirements: frequency 5HZ ~ 25HZ, amplitude 3mm, 0.09g.
25HZ~200HZ, amplitude 1.47mm, 116g.Horizontal, vertical, and longitudinal directions for 30 minutes.
 Cooling method: Built-in temperature control fan for cooling
Technical performance
Parameter
Label
Parameter value
unit
Voltage
U
24~60
VDC
Maximum continuous
current
le
30
A
Maximum peak current
l max
60(1s overcurrent protection)
A
PWM switching
frequency
fpwm
10
kHz
Output encoder power
supply
+5Vout
5
VDC
lcc
100
mA
Digital input
EN,DIR
Cutoff (high level):less than 1mA
mA
Conduction (low level):3-7mA
Digital output
Open collector
Maximum pull-up 48V,current 1A
Analog input impedance
Single-ended input
20
KQ
Analog signal voltage
Single-ended input
0~5V
V
RCsignal control
Cycle 1.5ms
Motor stop
1.5ms-2ms
Motor forward
1.5ms-1ms
Motor revere
Communication port
RS232
115200
bps
CAN
125/250/500
Kbps
Encoder input
Signal property
5V differential dnve
fmax
200
KHz
Controllable speed
range
RPM
0-3000
Rpm
Undervoltage protection
Vu
18
V
Overvoltage protection
Vo
65
V
Temperature rise
T
30A30mins35K
Operating temperature
Industrial grade
(standard product)
-25～+55
℃
Miitary grade
-40～+55
Storage temperature
Industrial grade
(standard product)
-35～+60
℃
Military grade
-55～+65
Packing and Shipping