Leeson 174709 Speedmaster DC Motor Control 3hp NEMA 4 Enclosure

Description

Used Leeson SPEEDMASTER DC Motor Controller.
Leeson Model Number: 174709
For Use with Permanent Magnet DC Motors Up to 3hp.
Input Voltage is 120 VAC or 230 VAC.
Output Armature Voltage is 0-90 VDC @ 120 VAC or 0-180 VDC @ 230 VAC.
This Controller was removed from a working environment and replaced with a 3-phase AC VFD system.  The enclosure had to be repaired with a riveted plate to satisfy OSHA Safety regulations.  I knew the individual that cut the rectangular hole for mounting a rectangular mounting hole switch.  That switch would not remain in place as the hole was improperly cut and was a hazard.  I have drilled a small locating hole in the back of the repair plate should anyone wish to install a FORWARD/BRAKE/REVERSE switch themselves.  This locating hole does not pierce the rivet plate.