LCD Smart Digital 60A PWM DC Motor Speed Controller Wireless Remote Control

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Wireless Remote Motor Speed Controller Digital LCD Display 30A Timing Tachometer
Popular
Popular
Product Introduction
Specifications:
1-2-3-4-5-6-7-8-9
E
function settings are as follows:
Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.
Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Speed ​​lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than
the maximum speed setting value. The default is 0.
Speed ​​upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum
speed setting value. The default is 100%.
Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed.
Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times.
Limit mode selection Function E: E1 Infinite position Default infinite position
E2 Press to start the motor to rotate forward and to the positive limit, the motor to stop, press to start to reverse
E3 Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop
E4 Press to start the motor forward rotation, forward rotation to the positive limit, the motor reverse rotation, cyclical work
Manual and automatic mode selection Press the MENU button 1 to display 0 to enter the manual and automatic mode selection 1 is manual mode 2 is automatic mode Press the plus and minus keys to switch Press RUN/STOP to save and exit
Item Name: Motor Speed Controller
Input Voltage: DC 10V-55V (the specific voltage should be equal to the rated voltage of the motor)
Output Voltage: Linear Under Load
Instantaneous Current: 60A
Continuous Current: within 40A
Type of Speed Regulation: Flow Regulation
Speed ​​Adjustment Method: Press +/-
Wireless Remote Control: Support
Timing: Yes
Slow Start and Slow Stop: Can Be Set
Speed ​​Digital Display: 0-100 Percentage Table
Speed ​​Adjustment Range: 0-100%
Control Frequency: 15KHZ
Battery: 1 x Button Battery(Included)
Wiring Type: Fence Type Terminal Block
Support Motor: Brush Motor
Module Size: 14.8cm x 9.5cm x 3.6cm
Panel Size: 14.2cm x 8.8cm
Note:
The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V)
For example, the rated voltage of the motor 12V is input to the governor 12V, and the rated voltage of the motor 36V is input to the governor voltage 36V.
Input 220V will burn
Package Includes:
1 x Motor Speed Controller
1 x Remote
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
Wireless Remote Motor Speed Controller Digital LCD Display 30A Timing Tachometer
Product Introduction
Specifications:
1-2-3-4-5-6-7-8-9
E
function settings are as follows:
Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.
Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Speed ​​lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than
the maximum speed setting value. The default is 0.
Speed ​​upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum
speed setting value. The default is 100%.
Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed.
Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times.
Limit mode selection Function E: E1 Infinite position Default infinite position
E2 Press to start the motor to rotate forward and to the positive limit, the motor to stop, press to start to reverse
E3 Press to start the motor forward rotation, forward rotation to positive limit motor reverse rotation, reverse rotation to negative limit motor stop
E4 Press to start the motor forward rotation, forward rotation to the positive limit, the motor reverse rotation, cyclical work
Manual and automatic mode selection Press the MENU button 1 to display 0 to enter the manual and automatic mode selection 1 is manual mode 2 is automatic mode Press the plus and minus keys to switch Press RUN/STOP to save and exit
Item Name: Motor Speed Controller
Input Voltage: DC 10V-55V (the specific voltage should be equal to the rated voltage of the motor)
Output Voltage: Linear Under Load
Instantaneous Current: 60A
Continuous Current: within 40A
Type of Speed Regulation: Flow Regulation
Speed ​​Adjustment Method: Press +/-
Wireless Remote Control: Support
Timing: Yes
Slow Start and Slow Stop: Can Be Set
Speed ​​Digital Display: 0-100 Percentage Table
Speed ​​Adjustment Range: 0-100%
Control Frequency: 15KHZ
Battery: 1 x Button Battery(Included)
Wiring Type: Fence Type Terminal Block
Support Motor: Brush Motor
Module Size: 14.8cm x 9.5cm x 3.6cm
Panel Size: 14.2cm x 8.8cm
Note:
The input must be divided into positive and negative. The input voltage must be equal to the rated voltage of the motor (within 10-55V)
For example, the rated voltage of the motor 12V is input to the governor 12V, and the rated voltage of the motor 36V is input to the governor voltage 36V.
Input 220V will burn
Package Includes:
1 x Motor Speed Controller
1 x Remote
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.