Input 115/230V AC output 90/180 10A DC Motor Speed Controller 90v dc controller

Description

Input 115/230V AC output 90/180 10A DC Motor Speed Controller 90v dc controller
Product Description
Product characteristics:
■SMT technology, small size ■Good following features, rapid respond speed ■Wide speed ratio, strong mechanical features ■Applicable to permanent magnet , DC torque motor ■Double closed-loop PI regulation (Voltage, current) ■Current setting and current-limiting protection (continuous operation setting current) ■Large low speed output moment ■Over-current protection function ■Quick stop function ■Arbitrary setting of upper and lower speed ■Soft start, soft stop setting function
■
Selection of speed mode, torque mode ■Normally open, close selection of enable signal ■Selection of input, output voltage switch ■Driver speed governing controlled by standard signal input 0-5V or 10K potentiometer
Specification
Input voltage AC:
115V/230V±10% (other voltages can be customized as customer’s requirements)
Frequency:
50/60HZ±5%
Output voltage DC:
0~90V 0-110V 0-160V 0-180V 0-220V (can be set)
Rated output current:
10A
Revolving speed ratio:
≤0.1%
Environment temperature:
-10℃～+60℃
Insulation voltage resistance:
1500V AC
Insulation resistance:
>500MΩ
Environment humidity:
relative humidity ≤65% (no moisture condensation)
Packing & Delivery