DC 6.5V-55V 30A PWM Motor Speed Controller Brush Motor Wireless Remote Control

Description

Product Function Introduction:
1-2-3-4-5-6-7-8-9 function settings are as follows:
Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second.
Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second.
Speed lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than
the maximum speed setting value. The default is 0.
Speed upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum
speed setting value. The default is 100%.
Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed.
Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds.
Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times.
With or without timing selection function 9: 0 none, 1 yes. Default is 1 yes.
The input must be divided into positive and negative input voltage to be equal to the rated voltage of the motor(within 6.5V-55V).
Specification:
Input
Voltage: DC 6
.5V-55
V
(
the specific voltage should be equal to the rated voltage of the motor)
Output Voltage: Linear Under Load
Instantaneous Current: 30A
Continuous Current: within 20A
Type of Speed Regulation: Flow Regulation
Speed Adjustment Method: Press +/-
Wireless Remote Control: Support
Timing: Yes
Slow Start and Slow Stop: Can Be Set
Speed Digital Display: 0-100 Percentage Table
Speed Adjustment Range: 0-100%
Control Frequency: 15KHZ
Battery: 1 x Button Battery(Included)
Wiring Type: Fence Type Terminal Block
Support Motor: Brush Motor
Module Size: 11.6cm x 7.6cm x 3cm/4.57" x 2.99" x 1.18" (Approx.)
Package List:
1x DC Motor Speed Controller
1x Remote
Notes:
Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
Please allow slight dimension difference due to different manual measurement.