DC 12-80V 30A Motor Speed Controller Digital Display Slow-Start/Stop Control

Description

DC 12-80V 30A Motor Speed Controller Digital Display Slow-Start/Stop Control
Features
Wide voltage range:  from 12V to 80V DC
Using Flame Retardant metal shell
The adjustable button,
It can achieve "increase", "minus", "function",'stop/run"
The output voltage and current can be show in display
6 Protection function: Over current protection / Low voltage protection / Slow start and slow stop settings / MIN. and MAX. speed settings / Step value setting
Voltage or current display settings
Parameter:
Model: CCM-TK
Voltage range: DC 12-80V
Maximum current: 30A
Frequency: 21Khz
Speed adjustment range: 0%-100%
Recommend use range:  within 12V 250W , within 24V 350W ......with 48V 500W
Dimensions: 131*107*53mm / 5.16*4.21*2.09 inches
Operating instruction
1. Before you attempting to wire the controller, make sure power is off
2. Connect DC brushed motor (or DC load) to the motor terminals as indicated on the wiring diagram
Note:
the brush motor line can be positive or negative, when the running direction is inconsistent with
the expectation, the direction can be changed by adjusting the line sequence position
3.  Connect a voltage of 12V-80V DC to the circuit making sure of the correct polarity of the connection
Note:
the voltage applied to the motor will be supply voltage applied to the circuit. the positive and negative
terminals of DC power supply should not be connected reversely, otherwise the controller may be damaged
4. Turn on the power. the product is default as the startup state when turn on the power
5. Ajust the speed and controller parameters via buttons
Package includes:
1 *  dc motor controller
1 * manual