-40%

7.3L Powerstroke High Pressure Oil Pump HPOP O-Ring KIT

$ 8.94

Availability: 57 in stock
  • Country/Region of Manufacture: United States
  • Returns Accepted: Returns Accepted
  • Brand: FKM
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Item must be returned within: 30 Days
  • Placement on Vehicle: Front
  • Condition: New other (see details)
  • Return shipping will be paid by: Buyer
  • Manufacturer Part Number: viton®

    Description

    NOTE:
    If you have a problem or question on the installation of any of my products feel free to contact me. I not only sell these kits but have installed them on my own vehicle, and more than willing to help
    .
    Most sellers
    just sell orings copied off of other ki
    ts
    , and cannot an
    swer your questions
    . This is a 12
    O-ring kit.
    Do you have a crankcase oil leak on the top of your 7.3 liter Powerstroke? It may look like a leak coming from the rear main crank seal since the engine valley has a drain and oil will drip out of the inspection plate between the engine and transmission. The O-rings are quite possibly the problem. This is a complete kit to re-seal the high pressure oil pump on 1994.5-2003 Ford 7.3 liter diesel engine. This kit consists of t
    welve
    brown viton® O-rings
    of proper hardness for each location
    ,
    Loctite
    ®
    680
    high strength retaining compound
    , and instructions. A breakdown of the kit is listed below.
    3
    -
    brown viton® O-rings
    ,
    Loctite
    ®
    680
    for the HPOP
    1
    -
    brown viton® O-rings
    for the reservoir plug
    2-
    brown viton® O-rings
    for the oil line fittings to head
    2-
    brown viton® O-rings
    for the inner fittings on the HPOP
    2-
    brown viton® O-rings
    for the inner fittings on th
    e
    head
    2-
    brown viton® O-rings
    for the IPR
    Instructions
    included in kit not emailed
    ---
    The O-rings will be separated out on the instruction sheet listing what O-rings they are to replace
    I sell only
    brown viton® O-rings
    . The reason I sell the
    brown viton® O-rings
    is that black O-rings come in various chemical make-up to include buna/nitrile etc.. I am no chemist and unless you are there is visibly no way to tell the difference. This is my method to insure you get only top quality
    viton® O-rings
    . Yes, even cheap O-rings
    from a supplier that does not even know what an hpop is
    will do the job for awhile, but I doubt you want to be fixing your leak again anytime soon.
    Paying a little more up front will undoubtably be cheaper in the long run.
    If you only need to seal your HPOP check out my other kit that has the four O rings for the HPOP, Loctite
    ®
    , and instructions.
    I now have a long thread repair plug as well as a combination kit for the "non serviceable" HPOP plug. Just click on "see other items"  under my name racecolo.
    Free standard Shipping with tracking number.
    Please look at my other auctions for your 7.3l Powerstroke O-ring needs
    .
    On Jun-29-13 at 16:58:20 PDT, seller added the following information:
    FREE! Sellers: Add a FREE map to your listings. FREE!