7.3 Powerstroke COMPLETE HPOP REPAIR KIT w- long thread

Description

NOTE:
If you have a problem or question on the installation of any of my products feel free to contact me. I not only sell these kits but have installed them on my own vehicle, and more than willing to help
.
Most sellers
just sell orings copied off of other ki
ts
, and cannot an
swer your question
s.
This is a 1
3
O-ring kit w
ith 303 stainless steel plug
.
Do you have a crankcase oil leak on the top of your 7.3 liter Powerstroke?  The O-rings and  or the "non serviceable plug is quite possibly the problem. This is a combination kit to save you a couple of bucks from ordering the items seperately. This is a complete kit to re-seal the high pressure oil pump on 1994.5-2003 Ford 7.3 liter diesel engine. This kit consists of
thirteen
brown viton® O-rings
of proper hardness for each location
,
2- .5ml
Loctite
®
680
high strength retaining compound
, and easy to follow instructions. A breakdown of the kit is listed below.
3
-
brown viton® O-rings
,
Loctite
®
680
for the HPOP
1
-
brown viton® O-rings
for the reservoir plug
2-
brown viton® O-rings
for the oil line fittings to head
2-
brown viton® O-rings
for the inner fittings on the HPOP
2-
brown viton® O-rings
for the inner fittings on th
e
head
2-
brown viton® O-rings
for the IPR
1- 303 stainless steel long thread plug machined right here in Colorado Springs CO
1-
brown viton® O-ring
of the proper hardness
installed on the plug.
Instructions
included in kit not emailed
---
The O-rings will be separated out on the instruction sheet listing what O-rings they are to replace.
I sell only
brown viton® O-rings
. The reason I sell the
brown viton® O-rings
is that black O-rings come in various chemical make-up to include buna/nitrile etc.. I am no chemist and unless you are there is visibly no way to tell the difference and there are
cheaper alternatives
. This is my method to insure you get only top quality
viton® O-rings
. Yes, even cheap O-rings will do the job for awhile, but I doubt you want to be fixing your leak again anytime soon.
I now have a
1994.5 to 1997
and a
1999-2003 7.3 FORD POWERSTROKE DIESEL FUEL BOWL RESEAL kits .
Since you need to remove the fuel bowl to service the HPOP
you might want to replace the seals in the fuel bowl as well.
Free standard Shipping with tracking number.
INTERNATIONAL BUYERS:
I can ship up to five kits for the same price if utilizing priority shipping flate rate box.  Ebay will not let me adjust shipping based on what I can fit in the box. Please contact me prior to purchasing multiple kits so that you will not incure extra charges for up to five kits. If only one  to five kits are needed no need to contact me prior to purchase.
Please look at my other auctions for your 7.3l Powerstroke O-ring needs
.
Even the self proclaimed EXPERT BUYS FROM ME!!