5V 12V 24V LED PWM DC Motor Speed Switch Regulator 5A 150W Dimmer Controller

Description

5V 12V 24V LED PWM DC Motor Speed Switch Regulator 5A 150W Dimmer Controller
Features
Soft-start function
,
When starting the motor, the current increases slowly, without inrush current, which effectively protects the motor
Digital encoder knob
,
H
igh precision and better consistency，
than normal potentiometer,
Better than ordinary potentiometer
Adjustable duty cycle, duty cycle upper and lower limit, minimum change value of duty cycle
With start-stop knob,
and can be controlled by an external switch
Note: the motor will turn on when power is on by default
Parameters
Operating voltage: DC 5-30V , input reverse polarity protection
Rated amperage: 5A ,  maximum instantaneous amps is 15A
Duty cycle: 0-100% , default step value 1%
Dimensions: 78.5mm x 43mm x 26mm  / 3.09 x 1.69 x 1.02 inches
Encoder knob operation instructions
1. in default display interface  (default is shows duty cycle)
- short-press: turn on/off motor
- long-press for 10 seconds: enter setting interface
- anticlockwise rotation:  reduced duty cycle
- clockwise rotation: increased duty cycle
2. in setting interface
- short-press: choose setting parameters: duty cycle upper limits , lower limits and stepper value
- duty cycle lower limit:  if set as "L00-L80", the duty cycle will be between 0-80%
- duty cycle upper limit: if set as "H00-H99 or 100", the duty cycle will be between 0-100
- stepper value(the minimum change) choose: "A01 , A02 , A05 , A10 , A20 , A25 ", which is 1% , 2% , 5% , 10% , 20% , 25% , optional
- anticlockwise rotation:
the corresponding parameter value decreases
- clock rotation:
the corresponding parameter value increases
- long-press knob to exit seeting interface
"STOP" port back of board
it can be connected switch button or 3.3V level ,
Do not use in complex electromagnetic environment,
No protection inside the circuit
(
Note that the external switch should use a self-return button or key
)
After all setting parameters are running, the last setting is automatically stored after power off
Package Included:
1 * DC Motor speed controller
Terms and Conditions :
Shipping
Shipping to most other countries takes about 10-30 days via Economy Int'l Airmail without tracking#. In rare case, it can take up to 40 days.
It depends on your location and local postal service(e.g., Russian Postal service is slow),
as well as the weather condition along the shipping.
Please verify your primary shipping address. We are not responsible for any wrong or undeliverable addresses
.
Payment
We accept payment via Paypal.
The buyer is responsible for any applicable import duties and local taxes.
Usually there's no any charges for small parcel. But please verify with your customs before making your purchase.
Contact Us
We take full responsibility if you receive wrong item or damaged item or item not as describled.
If you're not satisfied for any reason, please feel free to contact us. Just send us an message or email.
You can always get our solution pretty soon in our working time.
Your satisfaction is guaranteed.
About UG
Thank you for choose UG.
As a manufacturer of electronic module, UG have been in business more than 20 years, and therefor have wide experience in all the line we handle.
OEM Service Also Welcome!