36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller

Description

Note:
If 36-48V voltage control motor is always used, please select this controller.
This controller does not support professional and complex LCD equipment expansion. This controller has no fixed speed cruise function. If necessary, please contact us to install the fixed speed cruise module. If you choose to purchase a large number of controllers, please contact us directly.
★Application:
The battery type can be Lithium battery, Lead Acid battery…. It can be suitable to three - wire throttle brushless DC Hub Motor under 800W
Advantage of the Controller:
36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller
Note:
If 36-48V voltage control motor is always used, please select this controller.
This controller does not support professional and complex LCD equipment expansion.
This controller has no fixed speed cruise function. If necessary, please contact us to install the fixed speed cruise module.
If you choose to purchase a large number of controllers, please contact us directly.
★Application:
The battery type can be Lithium battery, Lead Acid battery….
It can be suitable to three - wire throttle brushless DC Hub Motor under 800W
Advantage of the Controller:
Soft Low-Voltage: When the battery voltage become lower, the current will also become lower to keep normal running. It not only protect the battery and extend the battery life, but also increase the running distance.
Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires.
Operation Method: Firstly make sure the battery, Key lock, Motor, throttle are well connected, and also connected the two Self-Study wires. Then open the battery power and key lock, the motor will spin, if the motor spinning direction is correct, please disconnect the two Self-study wires, then study is accomplished.
If the motor spin direction is reverse, firstly disconnect the Self-study wires, but connect them again at once, then the motor will spin on other direction. When the direction is right, disconnect the Self-Study wires, finished!
Start silently, balanced and constant power out-put, Mature Production technical of Controller and authentic quality.
Over-heat protection, the controller will cut the power when the temperature is overtop, and restart if the temperature is normal.
Intelligent management of battery system, the controller will reasonable control the battery discharge, low-voltage protection function to extend the battery life.
Over-load protection. When overload of the bike to make the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery
Timely control the motor phase current, and protect the MOS
Over voltage and low voltage protection
Double-Mode, controller can check the motor hall sensor condition automatically. If the motor sensors are broken, controller will operate to None-Hall mode.
When the motor phase is failure, controller will protect it, avoid motor burned, and protect the battery at the same time.
★Select the motor speed controller:
First look at your e-bike battery voltage levels, corresponding to the selected voltage controller, look at the size of the current controller previously used, such as the 16A-18A 350W controller, 22A-24A controller is 450W, 28A -30A controller is 500W, 31A-33A is 600W controller, 33A-35A is 800W controller, 36A-38A is the 1000W controller, 40A-43A is the 1200W controller, 50A is about 2000W controller. If the original e-bike is 350W we recommend upgrading to a faster wattage, so you can take advantage of the best motor speed and power.
★Package list:
1 x 36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller
Item Specifics
Brand
Gostang
MPN
Does Not Apply
Type
speed control
Voltage
36-48V
Warranty
1 year
Payment
We accept Paypal.
Shipping
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS First Class Package as default.
Returns
Buyer is responsible for the return cost.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.
Please don't open case via ebay or paypal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
Hot Item
Front Mount Distributor For Ford 2N 8N 9N 9N12100 New
USD 72.70
Carburetor Carb Fit For Briggs & Stratton Intek 190 Engine 214706T
USD 10.28
Carburetor EAE9510C w/ Gasket For Ford Jubilee NAA NAB Tractor Marvel Schebler
USD 37.69
Go kart Parts Centrifugal Clutch 3/4" Top and End Bore Belts Drive
USD 34.05
For Briggs & Stratton 550EX 09P702 9P702 Engines Replaces 799584 Carburetor
USD 12.32
New List Item
Male & Female Flat Face Coupler Kit 6679837 6680018 For Bobcat 753 763
USD 84.52
1/2" and 3/8" Drive Click Type Torque Wrench With Hard Case
USD 33.62
1500W Motor Speed Controller DC 48-72V For Electric E-bike Scooter Brushless
USD 30.82
Carburetor Kit Fit For Kohler Courage SV Series 15-20 Hp LTX 1040 YTH20K46
USD 15.89
Air Filter 32 083 09-S For Kohler KT745 KT715 KT735 KT740 KT725 KT730
USD 9.87
36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller
Note:
If 36-48V voltage control motor is always used, please select this controller.
This controller does not support professional and complex LCD equipment expansion.
This controller has no fixed speed cruise function. If necessary, please contact us to install the fixed speed cruise module.
If you choose to purchase a large number of controllers, please contact us directly.
★Application:
The battery type can be Lithium battery, Lead Acid battery….
It can be suitable to three - wire throttle brushless DC Hub Motor under 800W
Advantage of the Controller:
Soft Low-Voltage: When the battery voltage become lower, the current will also become lower to keep normal running. It not only protect the battery and extend the battery life, but also increase the running distance.
Automatically recognize the motor phase angle and motor right spin direction. It can be conducted by the Self-Study wires.
Operation Method: Firstly make sure the battery, Key lock, Motor, throttle are well connected, and also connected the two Self-Study wires. Then open the battery power and key lock, the motor will spin, if the motor spinning direction is correct, please disconnect the two Self-study wires, then study is accomplished.
If the motor spin direction is reverse, firstly disconnect the Self-study wires, but connect them again at once, then the motor will spin on other direction. When the direction is right, disconnect the Self-Study wires, finished!
Start silently, balanced and constant power out-put, Mature Production technical of Controller and authentic quality.
Over-heat protection, the controller will cut the power when the temperature is overtop, and restart if the temperature is normal.
Intelligent management of battery system, the controller will reasonable control the battery discharge, low-voltage protection function to extend the battery life.
Over-load protection. When overload of the bike to make the motor stall more than 2 seconds, the controller will cut off the current out-put to protect the motor and battery
Timely control the motor phase current, and protect the MOS
Over voltage and low voltage protection
Double-Mode, controller can check the motor hall sensor condition automatically. If the motor sensors are broken, controller will operate to None-Hall mode.
When the motor phase is failure, controller will protect it, avoid motor burned, and protect the battery at the same time.
★Select the motor speed controller:
First look at your e-bike battery voltage levels, corresponding to the selected voltage controller, look at the size of the current controller previously used, such as the 16A-18A 350W controller, 22A-24A controller is 450W, 28A -30A controller is 500W, 31A-33A is 600W controller, 33A-35A is 800W controller, 36A-38A is the 1000W controller, 40A-43A is the 1200W controller, 50A is about 2000W controller. If the original e-bike is 350W we recommend upgrading to a faster wattage, so you can take advantage of the best motor speed and power.
★Package list:
1 x 36-48V 800W Electric Bicycle E-bike Scooter Brushless DC Motor Speed Controller
Item Specifics
Brand :
Gostang
MPN :
Does Not Apply
Type :
speed control
Voltage :
36-48V
Warranty :
1 year
Payment
We accept Paypal.
Shipping
Please contact us if you have special requirements (combination of packaging etc.).
We offer free USPS First Class Package as default.
Returns
Buyer is responsible for the return cost.
We will closely examine the condition of the returned items and will not issue any refund/exchange before we make sure the items are in their original neat conditions.
Contact Us
Before leaving us neutral or negative feedback, please contact us first. We will do everything we can to give you a satisfying solution.
Please don't open case via ebay or paypal.
Please don't open any return request before contact us.
We do our best to resolve any issue. Leaving negative feedbacks and low ratings doesn't get things solved. So please talk with us and we will not let you down.
All rights reserved.