300W Mini Hot Air Gun Portable for DIY Shrink Wrapping+127PCS Heat Shrink Tubes

Description

Description
It can be used for heating the embossed powder relief powder and shrinkable sheet. Keeping 2 inches distance from work .It can reach at 392°F within a few seconds. Do not work over 3 minutes in one time .With ABS material outside and stainless steel inside. If you like DIY this is a good tool for you.
Feature
100% Brand New
With
ABS
material outside and
stainless steel
The temperature can't be adjusted but it heats up quickly. It can reach at about 200°C/390°F within a few seconds.
The
temperature control device
is arranged in the hot air gun circuit. When the current abnormally rises to a certain height with abnormal heat, the temperature control cuts off the current itself, which protects the safe operation of the circuit and eliminates the occurrence of dangerous situations such as high temperature melting and fire.
Micro-circulation Cooling System
is adopted. When the air outlet temperature reaches 200 degrees, the temperature of the hot air handing parts does not exceed 28 degrees (approximately).
Mini hot air gun is a perfect tool for
DIY
craft works.
Can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle.
Specifications
Material: Plastic,Stainless steel
Color: White
Rated power: 300W
Plug type: US plug
Length: 8.8"
Air outlet diameter: 0.4"
Feature
100% Brand New
127 packs of shrink tubing with different sizes
Easy to use.
Strong shrinkage
Specifications
Minimum Shrinkage Temp: +158°F
Full Shrinkage Temp: +257°F
Operating Temperature: 131°F to + 257°F
Material: PE
Cutting Method: Scissors or sharp cutter
Quantity: 127pcs
Package Includes
1 x Hot air gun
1 Box of Heat shrinkable tube (127pcs)
1 x Manual of Hot air gun only (Manual of Heat shrinkable tube excluded)
Note
Do not blow the object directly at 90°
with a heat gun,blowing at a 45°
angle to avoid heat absorption.
Please keep a 5 to 6 cm distance between the heat gun and the item.
The single use time should not be too long, usually 2-3 minutes. If the temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to use.
It is impossible to use industrial applications such as integrated circuits.
Please leave Positive Feedback and 5 Star Ratings for us if you are satisfied with our products and service, and we will do the same for you !
Your satisfaction is our highest priority. Please contact us if you have any questions or requests about our products or service.
We are always glad to assist you and stand by our products.
Payment Policy
We accept Paypal payment only. Please kindly check if you can do the payment via PayPal before placing an order.
Return Policy
If you have any questions, please contact us at first by eBay message. We will reply you within one working day (except weekends and public holidays). If you do not receive our reply, please kindly re-sent your message and we will reply to you as soon as possible
We are willing to accept returns within 30 days. Buyers pay the return shipping fee unless the return is our mistake.
Shipping
All items are shipped from US warehouse located at CA. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.  We promise to dispatch purchases from 1 to 3 business day when received payment. (No service on weekdays and public holidays).Delivery time for USPS or UPS depends on destination and other factors; If buyer has to meet a deadline please contact us before purchase.