2x 6V 12V 24V 28VDC 6-28VDC 3A 80W PWM DC Motor Speed Controller Regulator US

Description

Specifications:
Input supply voltage: 6-28 VDC
Maximum output power: 80W
Maximum continuous output current: 3A
Duty Cycle Adjustable: 5%-100%
On/Off switch built into potentiometer (fully counter-clockwise clicks off)
On-board power LED illuminates when power is applied to the module
Dimensions: 50mm x 32mm x 15mm (2in x 1.26in x 0.6in) (LxWxH) excluding potentiometer shaft
Operating instructions:
1. Turn the potentiometer fully counter-clockwise until it clicks to turn off the module.
2. Connect your DC motor (or DC load) to the motor terminals as labeled on the back of the circuit board.
3. Connect a voltage of 6V-28V DC to the circuit board making sure of the correct polarity of the connection. The voltage applied to the motor will be the supply voltage applied to the circuit board. We recommend adding an appropriately rated fuse inline with the positive supply in order to protect the circuit from any possible short circuits. NOTE: The ground connections to the power supply and the motor must be separate connections. Do not tie the "Power -" and "Motor -" connections together, otherwise the controller will not work.
4. Turn the unit on with the potentiometer. You can now control the speed of the motor by rotating the potentiometer.
Package Includes:
2x 6V-28V PWM DC Motor Controller Module
2x Potentiometer knob
On Mar 25, 2024 at 00:27:06 PDT, seller added the following information: