24V 48V 30A 3/4HP 1/2HP 1HP Multifunctional low voltage servo driver

Description

24V 36V 48V RS232 CAN control servo brushless motor speed control driver
Products Description
1.1 Scope ofApplication
 Suitable for driving permanent magnet synchronous servo motor, low voltage
AC servo motor.
 Applicable motor: 24V 600W, 48V 1200W
 Continuous current 30A, maximum peak current 60A over current protection
time: 1s).
 DC working power +24~60V±10%.
 Speed mode, torque mode, position mode;
1.2 Working Condition
1.2.1 Power supply
 Rated working power: 24-60VDC.
 Limit power supply range: 18--65VDC
 It can provide instantaneous current overload capability of 2 times continuous
current.
1.2.2 Feedback components
 Incremental encoder
 Absolute encoder
1.2.3 Operating environment
 Operating temperature: -25~55 °C (based on ambient temperature).
Storage temperature: -35~65°C (based on ambient temperature).
 Humidity: 5%--90%RH, condensation (25°C)
 Protection level: IP22.
 Insulation performance: input to the chassis DC600V, leakage current 0.07mA.
The insulation resistance is 20 MΩ and more.
 Three-proofing requirements: meet the requirements of three proofing (dust,
moisture, salt spray).
 Vibration requirements: frequency 5HZ ~ 25HZ, amplitude 3mm, 0.09g.
25HZ~200HZ, amplitude 1.47mm, 116g.Horizontal, vertical, and longitudinal directions for 30 minutes.
 Cooling method: Built-in temperature control fan for cooling
Technical performance
Parameter
Label
Parameter value
unit
Voltage
U
24~60
VDC
Maximum continuous
current
le
30
A
Maximum peak current
l max
60(1s overcurrent protection)
A
PWM switching
frequency
fpwm
10
kHz
Output encoder power
supply
+5Vout
5
VDC
lcc
100
mA
Digital input
EN,DIR
Cutoff (high level):less than 1mA
mA
Conduction (low level):3-7mA
Digital output
Open collector
Maximum pull-up 48V,current 1A
Analog input impedance
Single-ended input
20
KQ
Analog signal voltage
Single-ended input
0~5V
V
RCsignal control
Cycle 1.5ms
Motor stop
1.5ms-2ms
Motor forward
1.5ms-1ms
Motor revere
Communication port
RS232
115200
bps
CAN
125/250/500
Kbps
Encoder input
Signal property
5V differential dnve
fmax
200
KHz
Controllable speed
range
RPM
0-3000
Rpm
Undervoltage protection
Vu
18
V
Overvoltage protection
Vo
65
V
Temperature rise
T
30A30mins35K
Operating temperature
Industrial grade
(standard product)
-25～+55
℃
Miitary grade
-40～+55
Storage temperature
Industrial grade
(standard product)
-35～+60
℃
Military grade
-55～+65
Packing and Shipping
Company Profile
Jinan lanjiu Electronic Technology Co., Ltd. was founded in 2017. The company mainly engaged in high and low voltage permanent magnet DC motor, high and low voltage DC servo motor, and its supporting high and low voltage DC motor drivers, DC servo motor drivers and other high-quality products for industrial fields.