2 HP PM DC REVERSIBLE MOTOR DRIVE CONTROL SPEED IN 120 / 240Vac OUT 90 / 180Vdc

Description

THIS REVERSIBLE PERMANENT MAGNET DC MOTOR CONTROL WAS MANUFACTURED FOR AN INDUSTRIAL SUPPLY COMPANY. THE DRIVER COMES IN BULK PACKAGE. THEREFORE, YOU WILL NOT RECEIVE THE ORIGINAL PACKAGING. PLEASE NOTE SOME SCRATCHES FROM BEING OUTSIDE OF THE BOX.
WHEN THE SWITCH IS IN THE
REV
POSITION, THE MOTOR WILL ROTATE IN ONE DIRECTION;
WHEN THE SWITCH IS IN THE
FWD
POSITION, THE MOTOR WILL ROTATE IN THE OPPOSITE DIRECTION,
DEPENDING ON THE SPEED SETTING. YOU WILL NEED TO PROVIDE YOUR OWN POWER SWITCH TO TURN THE SPEED CONTROL ON OR OFF.
WARNING:
TURN SPEED POTENTIOMETER FULLY COUNTER-CLOCKWISE FOR ZERO SPEED BEFORE REVERSING! OTHERWISE, DAMAGE COULD RESULT.
THIS DRIVE IS GUARANTEED TO BE 100% FUNCTIONAL. WE HAVE SOLD MANY DRIVES FROM THE SAME SOURCE.
THIS DRIVE HAS BEEN DESIGNED AND BUILT TO SAVE ON INSTALLATION COSTS;
IT IS READY FOR USE.
JUST SELECT THE PROPER POWER SOURCE AND MOTOR. IT COMES WITH A STANDARD 3-PRONG US PLUG FOR 120 Vac. PLUG AND PLAY. THE LIST PRICE IS OVER 200 DOLLARS.
THE CONTROLLER CAN HANDLE PERMANENT MAGNET DC MOTORS UP TO ABOUT 1 HP AT 120 Vac INPUT; THE CONTROLLER CAN ALSO HANDLE DC MOTORS UP TO ABOUT 2 HP AT 240 Vac INPUT. THE INPUT VOLTAGE IS SET FOR 120 Vac, BUT IT CAN EASILY BE SET FOR 240 Vac BY SLIDING AN INTERNAL SWITCH.
BUILT-IN SOFT START. THE MOTOR WILL START FROM THE MINIMUM SPEED TO THE SPEED SET ON THE POTENTIOMETER. THIS IS A HIGHLY DESIRABLE FEATURE, ESPECIALLY IF YOU FORGET TO TURN DOWN THE SPEED WHEN YOU TURN ON THE CONTROL; OR IF POWER IS LOST MOMENTARILY.
WIRING
Connect power to L1 and L2 (120 Vac or 240 Vac depending on the internal voltage selection switch);
Connect one of permanent dc motor armature wires to the black wire; connect the other armature wire to the white  wire. The green wire is ground.
A1 ARMATURE NEGATIVE (BLUE WIRE)
A2 ARMATURE POSITIVE (BROWN WIRE)
SPECIFICATIONS
INPUT VOLTAGE: 120 Vac / 240 Vac (SELECTABLE BY INTERNAL SWITCH).
AMPERAGE: 10 A (MAXIMUM).
OUTPUT VOLTAGE (ADJUSTABLE):
0 Vdc - 90 Vdc FOR 120 Vac for 120 Vac input; 1 HP maximum.
0 Vdc - 180 Vdc FOR 240 Vac input; 2HP maximum.
APROXIMATE DIMENSIONS
9 3/8" x 5" x 2 3/4"
PLEASE REFER TO THE PICTURES AS THEY ARE PART OF THE DESCRIPTION.
PLEASE NOTE, I NORMALLY SHIP WITHIN 3 BUSINESS DAYS DUE TO MY JOB SCHEDULE.
SHIPPING IS FREE TO THE CONTINENTAL USA;
ACTUAL SHIPPING FEES WILL BE APPLIED
TO ANY OTHER LOCATION.
THE SELLER SHALL NOT BE RESPONSIBLE FOR ANY MISWIRING OR MISAPPLICATION OF THE DC MOTOR SPEED CONTROL.