-40%

1600W Heat Gun Hot Air Wind Blower Dual Temperature +4 Nozzles Power Heater Tool

$ 9.37

Availability: 14 in stock
  • Restocking Fee: No
  • Brand: Unbranded
  • Item must be returned within: 30 Days
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money back or replacement (buyer's choice)
  • MPN: Does Not Apply
  • Rated Frequency: 50- 60Hz
  • Voltage: 110 V
  • Power Source: Corded Electric
  • Model: Heat Gun
  • Return shipping will be paid by: Seller
  • Condition: New

    Description

    1600W Heat Gun Hot Air Wind Blower Dual Temperature +4 Nozzles Power Heater Tool
    1500W Heat Gun
    Features
    :
    - High-quality double heating wire with high temperature resistance, quick heat gathering and rapid heating. Turbine
    structure design, high-power turbine for wind.
    - Smart chip, overload protection, double-layer heat insulation design. Humanized anti-scald, safe and reliable. High-quality nylon flame-retardant materials can withstand high temperatures of 1050 degrees Celsius.
    - Two gears of wind speed can be adjusted, high temperature & high wind speed, low temperature & low wind speed,
    to meet the needs of different scenarios.
    - Comes with 4 nozzle attachments, which allow you to use for different purposes.
    - Can be widely used for melting materials, softening paint and plastic, removing sticker, bending plastic tube, changing
    floor tile, repairing mobile phones, deicing water pipes, car film and so on.
    Specifications
    :
    Power: 110V-60HZ, 1500W
    Air Volume: 280L/min (Low mode) 480L/min (high mode)
    Operating temperature: 375ºC (Low mode) 495ºC (high mode)
    Package Dimensions: (26 x 23 x 7.5)cm (L x W x H)
    Weight: 850g
    Color: Blue
    Package Includes
    :
    1 x Hot Air Gun
    4 x Stainless Steel Ball Point Heads
    1 x User Manual
    300W Heat Gun
    Features
    :
    - Heat-up quickly, the maximum temperature can reach 390°F
    - With ABS material outside and stainless steel inside
    - Micro-circulation cooling system is adopted
    - Mini hot air gun is a perfect tool for DIY craft works
    - Can be used for embossing powder, heat shrinkable film, clay, bump, rubber stamp, fast drying paint, glue, catalytic
    adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle.
    Specifications
    :
    Material: Plastic, Stainless steel
    Color: Black + Red
    Rated Power: 300W
    Rated Voltage: 110V
    Plug Type: US plug
    Dimensions: 8.7" (L) x 1.7" (D)
    Cable Length: 36"
    Air Outlet Diameter: 0.5"
    Note
    :
    1. Never touch the hot nozzle or melted glue for your sake.
    2. Keep out of the reach of children.
    3. Do not blow the object directly at 90° with a heat gun,blowing at a 45 degree angle to avoid heat absorption
    4. The single use time should not be too long, usually 2-3 minutes. If the temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to use.
    5. It is impossible to use industrial applications such as integrated circuits.
    Package Includes
    :
    1 X Hot Air Gun
    1 X User Manual
    Item will be sent out by USPS or other carrier accrodingly.
    No local pickup.
    We reserve the right to change the shipping method without notifying customers.
    We have multi-warehouses in NY/CA/KY/TX,so your item may not be sent from the warehouse which stated in the item location.
    We accept PayPal payment only.
    Please send us a eBay message if there is any problem with your order before leaving us a negative feedback/low DSR rating/opening a return case, we will reply within 24 hours.