12-30V 20A Reversible PWM DC Motor Speed Controller Regulator Remote Control New

Description

12-30V 20A Reversible PWM DC Motor Speed Controller Regulator Remote Control New
Features:
Provides variable speed capability for DC motor
Provides limit function
Achieves strat, stop, speed up and down, positive and reverse rotation RC controlled
SPECIFICATIONS:
Input Voltage:
DC
12
-
30
V
Power:
max 250W cont. for 12V
max 350W cont. for 24V
DC power supply >=1.3 times of the motor power
M
ax
O
utput
C
urrent:
30A (
Equipped with
30A fuse)
Power LED:
S
ystem starts normally,
the two
LEDs
flash at the same time.
When the motor is in stop status, the LED D3
flashes
once per second.
Direction LED:
In operation,
push Key
1 or Key 2 of
remote control (control
direction of
motor), the
LED
D4 or D3 light
s
up
.
P
otentiometer
:
10K
/
100k
Signal Input Pin
:
(with 4P
connecting lines
): c
onnect two manual switches to control the direction of motor
Limit Input Pin
:
Connect mechanical stroke switch (micro switch) to achieve limit function
Connect photoelectric switch; proximity switch;
hall switch (NPN normal open type) to achieve the limit function
Remote
C
ontrol
K
ey
F
unction:
(
one-way control
)
Key 1:
Positive
Key 2:
Reverse
Key 3:
Stop
Key 4:
Speed
U
p
Key 6:
Speed
Down
Remote
C
ontrol
K
ey
F
unction:
(
2-way control
)
Key 1:
Positive
Key 2:
Reverse
Key 3:
Stop
Key 4:
Speed
U
p
Key 5:
Control 2nd motor Run/Stop
Key 6:
Speed
Down
Item size:
160mm
x
92mm
x
43mm / 6.3" * 3.6" * 1.7"
Remote Control Size
:
36mm
x
84mm
x
16mm
IMPORTANT NOTES:
l
An appropriately rated fuse (rated a little higher than the maximum current you expect to draw) is recommended to ensure safe operation.
l
The controller is NOT reverse-polarity protected and it will be damaged if connect the supply voltage with wrong polarity. Double check all connections before applying power and always turn off the power supply before making any wiring changes
Operating instruction:
Before you attempting to wire the controller, make sure power is off.
WARNING: DO NOT REVERSE POSTIVE AND NEGATIVE POWER LOADS.THIS WILL DAMAGE THE CONTROLLER.
1. Connect wires refer to the “Instruction
Manual”
2. Turn on the power,
use the RC controller or
adjust the potentiometer
to
achieve
the function
.
3. The LED indicates the power up and the speed of motor.
Package Including:
1
x DC Motor Speed Controller
1 x
R
emote controller
1 x potentiometer
1 x 4P connecting lines
1 x
Instruction Manual
On Sep-29-17 at 10:57:30 PDT, seller added the following information: