110V US 300W Diy Using Heat Gun Electric Tool W/ Shrink Plastic Surface US Plu-g

Description

110V 300W White Diy Using Heat G un Electric Tool Shrink Plastic Surface US Plug
Descriptions:
Frequency: 50 / 60Hz，
Output Power: 300W
Temperature: >200 °C
Rated Voltage: 110V
Features:
- 100% stainless steel bearing twist
- Power cord,metal energy saving
- Safety switch port,electric shock
- Professional vents design,long life
- Rated temperature greater than 200 degrees
Output Power: 300W
Voltage: 110V
Line length: Approx 1m
Size: 225 x 47mm
Power supply type: AC power supply
Color：White
Rated Temperature: >200 °C
DIY Supplies: DIY soft rubber stamp, convex relief powder, powder, heat shrinkable film
Note:
- Don't blow it directly at 90 degrees with a hot air gun.
- The recommended distance from the hot air g un tuyere is 50 - 60mm away from the heating items.
- The single use time of the hot air g un should not be too long, usually 2 - 3 minutes. If the temperature of the fuselage is obviously increased, please close the hot air g un and wait for the cooling to use.
Product Weight: 221 G / 7.80 Ounces
Product Dimensions (L*W*H): 225X38X38 MM / 8.86X1.50X1.50 Inches
Package Weight: 289.0 G / 10.19 Ounces
Package Dimensions (L*W*H): 250X84X53 MM / 9.84X3.31X2.09 Inches
Retail Packaging: Yes, Colored Box
Package Including:
1 x Hot Air G un
1 x Manual